Your basket is currently empty!
CA615K HEAT-RESISTANT LEATHER HIDE WELDER’S GLOVE
£3.45
Description
HEAT-RESISTANT LEATHER HIDE WELDER’S GLOVE / KEVLAR® SEWN
High quality heat-resistant split leather (HR). Cuff with canvas lining. Kevlar® Technology sewn. American assembly. Length: 35 cm.
Heat-resistant treated upper split leather cowhide.
Thickness between 1.2 and 1.4 mm.
Hand lining: cotton fleece.
Cuff lining: cotton fabric weight of 300 g/m².
Kevlar® sewn.
Thickness between 1.2 and 1.4 mm.
Hand lining: cotton fleece.
Cuff lining: cotton fabric weight of 300 g/m².
Kevlar® sewn.
EN ISO 21420:2020 General requirements
| 4 | Dexterity (from 1 to 5) |
EN388:2016+A1:2018 Protective gloves against mechanical Risks (Levels obtained on the palm)
| 3 | Resistance to abrasion (from 1 to 4) | |
| 1 | Resistance to cutting (from 1 to 5) | |
| 3 | Resistance to tear (from 1 to 4) | |
| 2 | Resistance to puncture (1 to 4) | |
| X | Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F) |
EN407: 2020 Protective gloves against Heat & Fire risks (X = Unrealized test)
| 4 | Flame spread resistance. | |
| 1 | Contact heat resistance (from 1 to 4) | |
| 3 | Convective heat resistance (1 to 4) | |
| X | Radiant heat resistance (from 1 to 4) | |
| 4 | Small splashes of molten metal (from 1 to 4) | |
| X | Large quantities of molten metal (from 1 to 4) |
EN12477:2001/A1:2005 Protective gloves for welders
| TYPE | A | Welding – Other welding processes – less dexterity – Type A |
