Your basket is currently empty!
DCTHI – 3M THINSULATE™ LINED DOCKER GLOVE
£4.99
Description
Cowhide split leather with 3M Thinsulate™ lining. Canvas back with leather reinforcement. Canvas cuff.
Palm and fingers: cowhide split leather. Thickness between 1.0 and 1.2 mm.
Back: cotton fabric 200 g/m² minimum.
Cuff: cotton twill 200 g/m² minimum.
Interior: 3M Thinsulate™ thermal insulation 100 g/m² minimum.
Back: cotton fabric 200 g/m² minimum.
Cuff: cotton twill 200 g/m² minimum.
Interior: 3M Thinsulate™ thermal insulation 100 g/m² minimum.
REGULATION (EU) 2016/425
EN420:2003+A1:2009 General requirements
EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)
3 | Resistance to abrasion (from 1 to 4) | |
1 | Resistance to cutting (from 1 to 5) | |
3 | Resistance to tear (from 1 to 4) | |
1 | Resistance to puncture (1 to 4) | |
X | Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F) |
EN511:2006 Protective gloves against cold (X = Unrealized test)
1 | Resistance to convective cold (from 1 to 4) | |
2 | Resistance to contact cold (from 1 to 4) | |
X | Waterproof (0 or 1) |